Leckey BeMe User Manual page 46

p46 Leckey BeMe User Manual
SECTION 16.3:
ATTACHING AND
DETACHING FEMORAL
BARS
First, secure the hardware into the front two
curved slots on the underside of the seat base
. Ensure the split washer
the larger plane washer and the head of the
bolt. Place the locking plate
moulding and the nut. Secure the nut in place
so that the end of the bolt sits flush with the
,
end of the nut. The locking plate should be
free to move along the bolt between the
moulding and the nut. Orientate the locking
plate so that a short age faces forward.
, goes between
, between the
The femoral bar assemblies come in a left
and right pair. Ensure the left and right are
assembled with the flush side towards the
outside of the seat
Insert the femoral bar into the cavity in the
E
seat base , ensuring that the locking plate
is retained within the femoral bar. Insert the
countersunk screw into the seat base cover
F
plate , and secure underneath with the nut
supplied, and retained within the recess in the
moulding. Repeat for the other side.
.