Leckey BeMe User Manual page 6

p6 Leckey BeMe User Manual
• Caution Finger Pinch Hazard: Take
care when assembling or adjusting the
position of the seat components that
your fingers do not get pinched such
as positioning seat components and
tightening mountings.
• Caution Daily Checks: The seating
system is to be checked daily before use
to ensure that all harnesses and seating
elements are securely attached to the
seat and chassis. Also check the battery
charging cable for signs of damage
before use. See Section 11 for details of
checks.
• Caution Trip Hazard with Powered
Chassis: Ensure that battery charging
connection for the powered chassis is
removed from the seating system before
moving the seat.
• Caution Cleaning: Clean the seating
system regularly to prevent the build-
up of dirt on the seating elements
and the chassis. Accumulated dirt can
prematurely wear the seat cushions and
encourage corrosion on the chassis. Only
use non-abrasive household cleaners
and moist cloths, do not use running
water on the upholstery whilst it is still
attached to the seat. See Section 10.
• Caution Cleaning Power Washers/
Hoses: Do not use hoses or power
washers on the frame components,
the electric seat lift system is not sealed
against running water and may be
damaged by water ingress. See Section
10.
• Caution Servicing/Repair of Electronic
Components on Powered High-Low
Chassis: There are no user-serviceable
components in the electric powered
high-low chassis power lifting assembly.
Servicing and repairs are only to be
carried out by Leckey-authorised
personnel.
• Caution Disposal: Only dispose of the
seating system in a community waste
disposal site and ensure that the electrical
components are removed for separate
disposal.
• Caution Bringing into Use: When
bringing the seating system into use from
storage, allow it to acclimatise to ambient
temperature for 2 hours first. Wipe off
any moisture that has condensed on the
product.