Leckey BeMe User Manual page 64

p64 Leckey BeMe User Manual
SECTION 16.22:
ATTACHING AND
DETACHING SMALL
BASIC BACKREST
SPACER
To attach the small basic backrest spacer,
remove the cushion cover from the backrest
and remove the four screws, top and bottom,
, to separate the backrest platework from
the clamps. Secure the spacers using the
four longer screws onto the top and bottom
clamps .
Place the back plate pacer
surface of the lower clamp moulding
Reattach the backrest platework by securing
the four screws, top and bottom
To detach the small basic backrest spacers,
reverse the process. This should only be done
once before it is required to replace the basic
backrest clamps also.
, onto the front
.
.