Leckey BeMe User Manual page 43

SECTION 16.1:
ATTACHING AND
DETACHING SEATING
UNIT TO CHASSIS
Adjust the height of the chassis to its
maximum to reduce risk of back strain while
attaching the seat base. Refer to Section 9 on
how to adjust the height of the chassis you
have purchased.
Before attaching the seat base, ensure the
locking latch at the front is released
locking latch is locked
steps should be completed.
Image of locking latch locked
. If the
, then the following
Leckey BeMe User Manual p43
Locate the right and left grey locking latch
release buttons at the front of the seat
Simultaneously rotate the buttons towards the
centre of the seat
E
. An audible click will be heard when the
latches release.
, and then press inwards,
E
.