Leckey BeMe User Manual page 54

p54 Leckey BeMe User Manual
SECTION 16.11:
ATTACHING AND
DETACHING ANKLE
HUGGERS
To attach the ankle huggers, slide the
webbing through the side slot in the sandal
. Loop the webbing back up and through
the bottom and then top of the triglide
. Finally, to lock the webbing in place, pass
it through the bottom of the triglide again
Trim strap to required length.
To detach the ankle huggers, reverse the
process.
You can also attach the ankle huggers to a
single or two-piece piece footplate. Slot the
webbing through the slots and secure with
the tri-glide supplied with all ankle huggers.
.