Leckey BeMe User Manual page 65

SECTION 16.23:
ATTACHING AND
DETACHING HEADREST
To attach the headrest, ensure the clamp is
open by loosening the bolt and releasing it
from the other side of the clamp
clamp over the top bar of the backrest
and centralise.
Clamp together by accessing the head of the
bolt through the hole on the outside surface
of the extrusion
the bolt through the hole in the other half
of the clamp, engaging the threads of the
nut. The nut is retained within the extrusion
and may need to be realigned with the hole.
Tighten using the Allen key.
. Place the
, and placing the end of
,
To detach the headrest, reverse the process.
Leckey BeMe User Manual p65