Leckey BeMe User Manual page 113

SECTION 18.26:
ADJUSTING FLEXIBLE
WRAPAROUND
HUGGING LATERALS
The hardware for the flexible laterals is
adjusted in the same way as the Laterals. To
adjust the tension in the flexible lateral, adjust
the length of the webbing on the front lateral
strap .
Leckey BeMe User Manual p113
SECTION 18.27:
ADJUSTING ARMREST
HEIGHT
The armrest can be adjusted into several
incremental height positions. To adjust the
armrest height, loosen the bolt
off-centre from the midline of the plate. With
the end of the tool still in the bolt head, slide
the bolt across to the other side of midline,
, which will allow height adjustment of the
armrest up and down. To secure, slide the bolt
head back to the original off-centre position,
, into one of the several incremental height
positions, and tighten the bolt to secure in
place.
, which rests