Leckey BeMe User Manual page 103

SECTION 18.6:
ADJUSTING HIP PAD
WIDTH ON BASIC AND
SPLIT SEAT (MODERATE
AND COMPLEX
BACKREST)
To adjust the hip pad width on the moderate
and complex backrest, locate the adjustment
bolt , at the back of the moulding. Loosen
the bolt and adjust inward or outward to the
desired position. Tighten the bolt to secure in
place.
Leckey BeMe User Manual p103
SECTION 18.7:
ADJUSTING HIP PAD
HEIGHT AND ANGLE
To adjust the hip pad height, remove the
two bolts , and reset into the adjacent
hole combinations
nuts located in the recesses at the back of
the moulding down into the corresponding
recesses. The hip pad assemblies can also be
swapped left to right to achieve additional
height options.
To adjust the hip pad angle, loosen the two
bolts , and position at the desired angle.
Tighten the bolts to secure in place.
. Ensure to move the