Leckey BeMe User Manual page 104

p104 Leckey BeMe User Manual
SECTION 18.8:
ADJUSTING HEIGHT OF
BACKREST
To adjust the height of the backrest, loosen
the bolts of the backrest height adjustment
clamp , and raise or lower the backrest
telescoping tubes to the desired height. To
adjust the backrest down from the highest
position, press in the snap fastener
the side of the tube and push downwards.
Tighten the bolts of the backrest height
adjustment clamp
, at
, to secure in position.
SECTION 18.9:
ADJUSTING HEIGHT
OF INDIVIDUAL PADS
ON MODERATE AND
COMPLEX BACKRESTS
The moderate and complex backrest
pads have two clamp options, the basic or
complex clamp.
To adjust the height of the basic clamp, loosen
the bolts , and slide the clamp up or down
the backrest tubes to the desired position.
Tighten the bolts to secure in position.
To adjust the height of the complex clamp,
loosen the bolts
or down the backrest tubes to the desired
position. Tighten the bolts to secure in
position.
, and slide the clamp up