Leckey BeMe User Manual page 61

SECTION 16.18:
ATTACHING AND
DETACHING FLEXIBLE
LATERAL
Attaching the flexible lateral requires the same
hardware as the slim lateral. To attach the
slim lateral to the lateral bracket, first place
the machined boss into the corresponding
slot in the slim lateral plastic pad
this assembly against the inside surface of
the lateral bracket, so that the bracket locates
into the recess of the plastic pad and the
machined part locates in the slot of the lateral
bracket .
Place the split washer, then the plane washer
onto the bolt and pass it through the threaded
hole in the machined part
with the Allen key.
. Position
To detach the slim lateral, reverse the process.
Leckey BeMe User Manual p61
. Secure in place