Leckey BeMe User Manual page 71

Loosen the bolts of the shoulder pad clamp,
, and slide off the backrest tube. Slide the
shoulder pad clamp onto the rain canopy
backrest tube and secure the bolts
Place the ends of the backrest tube into the
receivers of the backrest height clamp. Press
E
in the poppers , at the sides and push the
backrest tube down further. Tighten the bolts
of the backrest height adjustment clamp
.
To attach the rain canopy, slide the
connectors down and over the receiver
G
, and rotate the clip inwards
into position.
F
.
Leckey BeMe User Manual p71
E
F
H
G
, to snap