Leckey BeMe User Manual page 79

SECTION 16.37:
ATTACHING AND
DETACHING
SHOULDER ANGLE
SPACER (MODERATE
BACKREST ONLY)
To attach the angled shoulder spacer,
remove the cushion cover from the shoulder
moulding and remove the four screws to
separate the moulding from the clamp
Place the back plate pacer
surface of the clamp moulding
.
, onto the front
.
Leckey BeMe User Manual p79
Secure the angled shoulder spacer using the
four longer screws
moulding by tightening the screws
the angled shoulder spacer.
E
The process should not be reversed using the
same hardware. To remove the spacer, a new
basic backrest clamp will be required.
. Reattach the shoulder
E
, into