Leckey BeMe User Manual page 40

p40 Leckey BeMe User Manual
TECHNICAL SPECIFICATIONS:
Feature
Make and Model
Seat lift operation
Environmental
Electrical
Certification
Parameter
Actuator
Battery
Hand Controller
Battery Charger
Duty Cycle
Actuator Force
Actuator operating speed
Noise level
IP Rating
Operation
Transport and Storage
Height above sea level
Actuator operating voltage
Actuator operating current
Charger input
Charger output
Charging current
Charging indication on
charger
EMC
Electrical Safety
Value
LINAK 281209-01
LINAK BA18021-00
LINAK HB41000-00004
LINAK Battery Charger CH01.
Only use this supplied battery
charger
Maximum 10% Or 2 min
continuous followed by 18 min
not in use
3500N push, 2000N pull
4.7mm/sec at full load
48 dB(A)
IP51 (not waterproof, clean with a
damp cloth only)
+5 deg C to 40 deg C
20% to 80% RH, non-condensing
-10 deg C to 50 deg C
20% to 80% RH, non-condensing
Allow 2 hours for the device to
come to room temperature after
removing from storage
Max 3000m
24V
Maximum 3.9A
100 – 240 Vac, 50/60 Hz
27.6 Vdc ± 2%
Max 500 mA
Green LED – Mains power
Yellow LED – Charging, turns
to Green when battery fully
charged
IEC60601-1-2:2014 for home use
environment
IEC60601-1:2005/A1:2012