Unable To Print - Oki PRO330S User Manual

Unable to print

Possible causes
This machine is in the sleep
mode.
This machine is powered off.
The LAN cable/USB cable is
disconnected.
The cable is defective.
This machine is offline.
An error message appears on
the display of the operator
panel.
The interface settings are
disabled.
There is a problem with the
print function.
This machine is not set as the
default printer.
The output port of printer
driver is incorrect.
Printing from another interface
is in progress.
"PRESS OK BUTTON/INVALID
DATA" appears on the display
of the operator panel, and the
printing does not start.
Solution
Press «POWER SAVE» on the
operator panel to switch over
to the standby state.
Please turn the power on.
Please check that the cable
is correctly connected to this
machine and the PC.
Please replace the cable with
a new one.
Press «ONLINE» on the
operator panel to display
"READY TO PRINT".
Please check the error
message displayed.
Please check the interface
settings you are using to make
sure that there is no conflicts
between the settings of this
device and the connection
environment.
Please check to see whether
or not the Menu Map can be
printed.
Set this machine as the
default printer.
Right click on the [Printer in
use] icon in the [Devices and
Printers] folder, and select [Set
as default printer].
Please select the output port
to which the LAN cable/USB
cable is connected.
Please wait until the printing
is complete.
Select [MENUS] - [SYSTEM
ADJUST] - [TIMEOUT INJOB]
on the operator panel to
extend the set time. The
factory default setting is 40
seconds.
When "PRESS OK BUTTON/
INVALID DATA" is displayed
and printing is not performed,
the print data may not be
suitable for this machine.
Please check to see that the
printer driver you are using is
compatible with this machine.
- 186 -
Reference
How to use the operator
panel
Turning the power on
How to use this machine
-
-
Message List
How to use this machine
Connecting via a wireless
LAN
Checking the machine
information
-
-
-
-