Print Statistics - Oki PRO330S User Manual

Item
ERASE PRIVACY DATA EXECUTE
PRESENTER UNIT
SETTINGS MENU RESET
SAVE MENU
RESTORE MENU
CHANGE NEW PASSWORD
PASSWORD
VERIFY PASSWORD

PRINT STATISTICS

This section configures settings rated to the Print Statistics function.
Item
USAGE REPORT
RST MAIN CNT
CHANGE NEW PASSWORD
PASSWORD
VERIFY PASSWORD ****
Setting value
DISABLE
ENABLE
EXECUTE
EXECUTE
EXECUTE
************
************
Setting value
ENABLE Enables/Disables the Print Statistics function.
DISABLE Changing settings will automatically restart the machine.
EXECUTE Resets the main counter.
**** Set a new password to enter [PRINT STATISTICS].
The password is set with 4 digits.
Input the new password set in [NEW PASSWORD] for
verification.
- 80 -
The shaded settings are the factory default settings.
Description
Erases the following data set in this machine.
• Admin password, values set in various menus
• Data registered to the machine
Enables/Disables the presenter unit.
ENABLE: When installed
DISABLE: When not installed
Match it with the installation state of the presenter unit.
Please note that a paper jam may occur if they do not
match.
Resets the menu settings to factory default settings.
Saves the current menu settings.
The last executed menu will be saved, and will
overwrite what was saved at that point of time.
Restores settings to the saved menu settings.
Displayed when you are saving the menu settings after
executing [SAVE MENU].
It is invalid if it is executed when there is print data.
Set a new password to enter [ADMIN SETUP] and [BOOT
MENU].
Set the password using 6 to 12 digits or lower-case
letters.
Input the new password set in [NEW PASSWORD] for
verification.
Set the password using 6 to 12 digits or lower-case
letters.
The shaded settings are the factory default settings.
Description