Notifying Machine Errors Via E-Mail - Oki PRO330S User Manual

Notifying machine errors via e-mail

To use this function, set up the mail server in advance.
• For the setup method, refer to
• Notifying errors via e-mail
1
Open the web page of this machine.
• For details on how to open it, refer to
2
Log in as an administrator.
3
Select [Admin Setup].
4
Select [Network] - [E-mail] - [Alert Settings].
5
Input the e-mail address to receive alerts in [Alert Settings].
6
Click [Settings] of the e-mail address you input.
If you want to apply the alert condition to another address, click [Copy].
7
Select [Upon occurrence of an event] in [Way of Email Alerting], and click
[To STEP 2].
8
Configure the settings by following the on-screen instructions.
If you are checking an error or warning that requires an alert, a window will be displayed
that allows you to specify the time difference between the occurrence of the error and the
sending of the alert.
9
Click [OK].
10
Click [View a summary of current configuration] to check the current
settings, and click [X] to close the window.
You can also check the current settings of up to two addresses in the home window.
Select the address you want to check from the list.
11
Click [Submit].
The new settings will take effect after the network function of the machine has been reset.
"Setting E-mail receiving (Web page)" (Page
"Opening the web page" (Page
- 242 -
241).
225).