Edges of text are blurred
Possible causes
The LED head is dirty.
The paper is moist.
Toner comes off due to rubbing
Possible causes
The media weight is set
incorrectly.
Specks appear on glossy paper
Possible causes
The media weight is set
incorrectly.
Solution
Wipe it with soft tissue paper.
Replace with new paper.
Solution
Set an appropriate value for
[Media Weight] in the user-
defined paper settings of the
printer driver. Alternatively,
increase the setting value for
[Media Weight].
If you do not use the printer
driver, click [MENUS] - [FEEDER
CONFIG] - [MEDIAWEIGHT] on
the operator panel, and set an
appropriate value. Alternatively,
increase the setting value for
[MEDIAWEIGHT].
Solution
Set an appropriate value for
[Media Weight] in the user-
defined paper settings of the
printer driver. Alternatively,
increase the setting value for
[Media Weight].
If you do not use the printer
driver, click [MENUS] - [FEEDER
CONFIG] - [MEDIAWEIGHT] on
the operator panel, and set an
appropriate value. Alternatively,
increase the setting value for
[MEDIAWEIGHT].
- 201 -
Reference
Cleaning the LED head
Loading paper
Reference
Loading paper
Registering paper
information in the printer
driver
Reference
Loading paper
Registering paper
information in the printer
driver