Adjusting The Color Balance (Density) - Oki PRO330S User Manual

Adjusting the color balance (density)

Adjusts the highlight (light area), mid-tone and dark tone (dark area) of each color, i.e. cyan,
magenta and yellow.
This section explains the procedure to adjust the cyan color. If you want to adjust other colors,
please adjust each color individually.
1
Check that "READY TO PRINT" appears on the display.
2
Press « ∧ » or « ∨ » several times to display [CALIBRATION], and then
press «OK».
3
Press « ∧ » or « ∨ » several times to display [CYAN TUNING], and then
press «OK».
4
Press « ∧ » or « ∨ » several times to display [CYAN HIGHLIGHT] (light
area) or [CYAN MID-TONE] (middle area) or [CYAN DARK] (dark area), and
then press «OK».
5
When the setting value flashes, press « ∧ » or « ∨ » to display your
desired value, and then press «OK». You can darken the density by
adjusting it in the plus direction, or lighten the density by adjusting it in
the minus direction.
6
Check that "*" is displayed to the right of the value which you want set.
7
If you press «ONLINE», the machine returns to the standby state "READY
TO PRINT".
- 66 -