Calibration - Oki PRO330S User Manual

CALIBRATION

This section configures color-related settings.
Item
DENSITY CONTROL
ADJUST DENSITY
COLOR TUNING
CYAN TUNING CYAN HIGHLIGHT 0
CYAN MID-TONE
CYAN DARK
MAGENTA TUNING MAGENTA
HIGHLIGHT
MAGENTA MID-
TONE
MAGENTA DARK
YELLOW TUNING YELLOW
HIGHLIGHT
Setting value
FULL Sets whether to perform density adjustment automatically.
QUICK FULL: Performs density adjustment automatically.
MANUAL QUICK: Performs density adjustment automatically when
the machine determines that it is necessary to adjust the
density.
MANUAL: Does not perform density adjustment.
EXECUTE Performs density adjustment.
Please execute it when the machine is in the standby mode.
PRINT PATTERN Prints a pattern for adjusting the gradation characteristics.
Adjusts the highlight (light area) of the special gradate cyan.
+1 You can darken the density by adjusting it in the plus
+2 direction, or lighten the density by adjusting it in the minus
+3 direction.
-3
-2
-1
0 Adjusts the mid-tone of the special gradate cyan.
+1 You can darken the density by adjusting it in the plus
+2 direction, or lighten the density by adjusting it in the minus
+3 direction.
-3
-2
-1
0 Adjusts the dark tone (dark area) of the special gradate
+1 cyan.
+2 You can darken the density by adjusting it in the plus
+3 direction, or lighten the density by adjusting it in the minus
-3 direction.
-2
-1
0 Adjusts the highlight (light area) of the special gradate
+1 magenta.
+2 You can darken the density by adjusting it in the plus
+3 direction, or lighten the density by adjusting it in the minus
-3 direction.
-2
-1
0 Adjusts the mid-tone of the special gradate magenta.
+1 You can darken the density by adjusting it in the plus
+2 direction, or lighten the density by adjusting it in the minus
+3 direction.
-3
-2
-1
0 Adjusts the dark tone (dark area) of the special gradate
+1 magenta.
+2 You can darken the density by adjusting it in the plus
+3 direction, or lighten the density by adjusting it in the minus
-3 direction.
-2
-1
0 Adjusts the highlight (light area) of the special gradate
+1 yellow.
+2 You can darken the density by adjusting it in the plus
+3 direction, or lighten the density by adjusting it in the minus
-3 direction.
-2
-1
- 81 -
The shaded settings are the factory default settings.
Description