Printing By Correcting Barcodes - Oki PRO330S User Manual

Printing by correcting barcodes

Corrects the images and objects of the barcode bar to improve the readability of the barcode.
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Click [Options] from [Barcode correction] in the [Setup] tab.
5
Select a value in [Barcode Width Adjustment].
• Thinner print results may also be achieved for pictures and shapes other than barcodes.
• If you check this item when printing colored data, the colored part may be printed with unintended colors or
overlaps.
6
Check [Replace mono barcode with cyan] if necessary.
• The black and gray part of pictures and shapes other than barcodes may also be replaced with cyan.
• If you check this item when printing colored data, the colored part may be printed with unintended colors or
overlaps.
• If the grayscale setting is available in your application, it may not be enabled.
7
Click [OK].
8
Click [Print].
- 126 -