Distance And Angle Measurement - Sokkia CX-52 Operator's Manual

4. Press {ESC} to finish signal
checking and return to Obs Mode.

• When
• If no key operations are performed for two minutes, the display automatically
returns to the OBS mode screen.

11.2 Distance and Angle Measurement

An angle can be measured at the same time as the distance.
PROCEDURE
1. Sight the target.
2. In the first page of Obs Mode,
press [MEAS] to start distance
measurement.
When measurement starts, EDM
information (distance mode, prism
constant correction value,
atmospheric correction factor) is
represented by a flashing light.
A short beep sounds, and the
measured distance data (SD),
vertical angle (ZA), and horizontal
angle (HA-R) are displayed.
is displayed persistently, contact your local dealer.
11. DISTANCE MEASUREMENT
OBS
SD
ZA
HA-R
MEAS SHV
F i n e
OBS
SD
ZA
HA-R
0SET COORD
STOP
39