Restoring Default Settings - Sokkia CX Series Operator's Manual

3. Input new password twice and
press {ENT}. The password is
changed and <Config> is
restored.
• If no password was input as new
password and {ENT} was
pressed, no password is set.
• Input range of password: 3 or more characters and 8 or fewer characters.

33.5 Restoring Default Settings

The following explains the two methods of restoring default settings:
Restoring set items to initial settings and turning power on. Initializing the data
and turning power on.
• Restore the following items to the initial settings when the CX was shipped.
EDM setting, Config mode settings (including softkey arrays)
About initial settings when the CX was shipped: "33.1 Configuration -Config
Mode-", "33.3 Allocating Key Functions"
• Initialize the data. The following data is initialized.
Data within all jobs
Known point data within memory
Code data within memory
PROCEDURE
turning power on
1. Turn the power off.
2. While pressing {F4} and {B.S.},
press {ON}.
3. The CX is turned on, "Default set"
appears on the screen and all
items are restored to their initial
settings.
Restoring set items to initial settings and
33. CHANGING THE SETTINGS
Change password
New password
New password again
1
253