Sidestream Co Measurement Method - Vetland V1410 User Manual

V1410 / V1412 User Manual
Sidestream CO
Connect the CO
line to the sampling port on the patient breathing wye piece.
1
2
Respiration data can be achieved via ECG connections or EtCO2 measurements. When the
3
EtCO2 sensor is connected to the monitor, the measurement is prioritized to pull the respiration
data from the EtCO2 sensor.
EtCO2 and FiCO2 will be displayed on the V1410 / V1412 screen 15 seconds after a successful
4
detection of exhaled breath.
5
To activate the EtCO2 trace, select Menu  EtCO2  TRACE  ON.
94
Measurement Method
2
module connector to the V1410 / V1412 CO2 connector and connect the sample
2
Push the CO module connector into the CO
2
you hear a click.
port until
2