Changing The Ibp Label - Vetland V1410 User Manual

V1410 / V1412 User Manual
Table for Labels According to the Site of Measurement
Label
ABP Arterial Blood Pressure
CVP Central Venous Pressure
ICP Intracranial Pressure
PAP Pulmonary Arterial Pressure

Changing the IBP Label

1
Mode
Setting
SPEED
LABEL
UNIT
* ZERO
SCALE
TRACE
* Adjust the zero point of the transducer: In order to obtain accurate results, make sure to adjust the zero
point of the transducer before measuring a patient.
** Fixed: Basic value according to the established label (ABP: 0–200, CVP: 0–50, ICP: 0–50, PAP: 0–50).
Optimum: Scale of waveform is automatically adjusted regardless of the level.
86
Site
Range for Change
6.3, 12.5, 25, 50 mm/sec
ABP, CVP, ICP, PAP
mmHg, kPa
ON
** OPTIMUM / FIXED
ON / OFF
Measurement
Artery group throughout the whole body
(systemic)
Central vein / atrium group
Intracranial group
Pulmonary artery group
To change the IBP label, press the Menu button one
time and select LABEL.
Description
Set the speed of IBP waveform.
Set the level according to the
measurement site of BP. Change the alarm
setting range according to level.
Set the unit of IBP measurement.
Adjust the zero point of the transducer.
Set the wave scale.
Set the display of waveform.