Microstream Co 2 Measurement Method - Vetland V1410 User Manual

Microstream CO
1
2
The respiration value is automatically changed when the EtCO2 is measured. It will display the
3
changes of impedance.
The EtCO2 and FiCO2 will be displayed on the V1410 / V1412 screen after 3 seconds when it
4
detects proper input.
The EtCO2 waveform and data are displayed. If the waveform is not displayed on the screen,
5
select Menu  EtCO2  TRACE  ON.
6
You can change the EtCO2 waveform when required.
Measurement Method
2
Connect the gas tube to the V1410 / V1412 microstream
port and attach the other end to the hospital gas device.
Connect the filter line to the V1410 / V1412 microstream
port and the other end to the patient's nose.
V1410 / V1412 User Manual
89