Vetland V1410 User Manual page 56

V1410 / V1412 User Manual
2
Attach a patient's electrode to the sites shown below.
IEC
Electrode
Lead
Color
R Red
L Yellow
F Green
N Black
C White
 The pulse may be chosen from the ECG or SpO2 sensor if both are on. If one of the
sensors is off, then the pulse reading from the remaining sensor is displayed in both ECG
and SpO2 areas of the display.
 The default setting of ECG Filter is ANIMAL.
NOTE
 The default setting of ECG Lead is Lead II.
 When using an ECG 5-lead cable, you need to set the Menu for a 5 lead ECG cable.
Be certain the correct setting within the ECG configure-cable menu is chosen to match the
cable you are using (3 or 5 lead). If the wrong cable is chosen in the menu settings, the
monitor will be unable to display any ECG information.
Caution
56
<Standard 3 Electrode Placement>
AAMI
Electrode
Lead
Color
RA White Just below the clavicle (scapula) near the right shoulder
LA Black Just below the clavicle (scapula) near the left shoulder
LL Red Lower area of the left side of the abdomen
RL Green Lower area of the right side of the abdomen
Select the candidate lead for measurement among the chest
V Brown
leads
Attaching site