Messages – Calibration Mode
Message
FILTERLINE NOT
CONNECTED
CALIBRATION IN
PROGRESS
CALIBRATION NOT READY
CALIBRATION GAS
REMOVEABLE
CALIBRATION OK
CALIBRATION FAIL
CALIBRATION ERROR -
MEASUREMENT ERROR
CALIBRATION ERROR -
WRONG GAS CONNECTION
CALIBRATION ERROR -
NO STABLE GAS FLOW
CALIBRATION STOP
The filter line is not connected.
The calibration is in progress.
Not ready to calibrate the EtCO2 Module.
(Run calibration after a while)
Remove the EtCO2 calibration gas from the accessory.
The calibration is complete.
Failed the calibration.
Failed to measure the CO
(In case of the wrong setting value)
Not connected to CO
gas.
2
CO
GAS pressure is not stable.
2
Calibration has stopped.
(It will not show in normal operation.)
V1410 / V1412 User Manual
Description
gas.
2
91