How To Connect The Ibp Cable - Vetland V1410 User Manual

How to Connect the IBP Cable

1
2
To remove the converter from the cable, press the tab gently inside the clear cover and then
separate the reusable interface cable.
NOTE
3
Connect the monitor interface cable to the IBP input
connector.
Hold the back side of the clear cover surrounding the
connector, and connect the converter to the reusable
monitor interface.
In a clean environment, open the package to check if all
parts are well connected and if the handle of the
stopcock is positioned properly. All side ports of the
stopcock are protected by the outlet plugs and may not
be removed until the system is full and the foam has
been removed.
V1410 / V1412 User Manual
83