Filling The Co Absorber Canister; Figure 4-1 Installing Oxygen Hose And Absorbent Canister - Vetland EX3000 Operator's Manual

Filling the CO Absorber Canister
2
1. Turn the canister fastener knob counterclockwise and remove the absorber canister (see Figure 4-1).
2. Fill the absorber canister with CO
that the granules do not interfere with the sealing surfaces.
3. Reinstall the absorber canister and turn the knob clockwise until hand-tight.
CAUTION!
4-2
absorbent to within 1 inch of the top of the canister. Take care
2
Do not over-tighten the canister knob. Excessive tightening may damage the
absorber canister.
1"
+

Figure 4-1 Installing Oxygen Hose and Absorbent Canister

–
System Setup