Mainstream Co Measurement Method - Vetland V1410 User Manual

Mainstream CO
Connect the CO
sensor to the Y-hose which is connected to the patient.
1
2
Respiration data can be achieved via ECG connections or EtCO2 measurements. When the
3
EtCO2 sensor is connected to the monitor, the measurement is prioritized to pull the respiration
data from the EtCO2 sensor.
The EtCO2 and FiCO2 will be displayed on the V1410 / V1412 screen 15 seconds after a
4
successful detection of exhaled breath.
5
To activate the EtCO2 trace, select Menu  EtCO2  TRACE  ON.
Measurement Method
2
module connector with the V1410 / V1412 CO
2
Push the CO module connector into the CO
2
you hear a click.
V1410 / V1412 User Manual
connector, and connect the
2
2
port until
93