Customer-Provided Fuses - Sigma 2-16KL Operating Manual

Pos : 97 /010 U nivers almodule/ Leerz eile @ 0\m od_1202116244500_0.doc x @ 114 @ @ 1
Pos : 98 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/050 Aufstellung und Ans chl uss/050- 0020-0020 Sic herungen baus eits ( außer 3-30KS, 8KS, 8KBS) @ 7\m od_1306312302397_68.docx @ 43513 @ 3 @ 1
→
5.2.2

Customer-provided fuses

NOTE
Pos : 99 /010 U nivers almodule/ Absc hnittsw echs el @ 0\m od_1202124514062_0.docx @ 418 @ @ 1
Pos : 100 /010 Univ ers almodul e/ Seitenwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
Version 08/2012, Rev. 1.24 of 28/04/2022 • sb
Translation of the original operating manual, part no. 0700702
The centrifuges are equipped with a mains power switch with an integrated
thermal circuit breaker.
•
Switch the unit off by actuating the mains power switch.
•
If it has tripped, let the circuit breaker cool for approximately 2 minutes.
•
Switch the unit on.
The centrifuge is now ready for operation.
Typically, the centrifuge must be protected with 16 Amp B fuses that are to
be provided by the customer.
To ensure safe disconnection in the event of a fault, an AC/DC-sensitive
RCD (residual current device) must be integrated in the wiring system of
the building.
Refrigerated Centrifuge Sigma 2-16KL
5 Set-up and connection
29 / 82