Table of Contents
Advertisement
Pos : 56 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0060-0063 Lebensdauer M asc hRL - Übersc hrift neutral @ 83\mod_1622527518082_68.docx @ 878477 @ 3 @ 1
3.6.7
Service life
Pos : 57 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0060-0064 Lebensdauer M asc hRL - T ext @ 26\mod_1405319032612_68.doc x @ 192143 @ @ 1
WARNING
NOTE
Pos : 58 /010 U nivers almodule/
Seitenw ec hsel @ 0\m od_1202116244312_0.docx @ 105 @ @ 1
Version 08/2012, Rev. 1.24 of 28/04/2022 • sb
Translation of the original operating manual, part no. 0700702
The rotors and accessories have a limited service life.
•
Perform regular checks (at least once per month) for safety reasons!
•
Pay special attention to changes, such as corrosion, cracks, material
abrasion, etc.
•
After 10 years, they must be inspected by the manufacturer.
•
After 50,000 cycles, the rotor must be scrapped for reasons of safety.
•
If other data concerning the service life are engraved on the rotor or
bucket, these data shall apply accordingly. For example, a bucket with
the engraving "max. cycles = 10,000" has a service life of 10,000
cycles, and a rotor with the engraving "Exp. date 01/27" must be
scrapped in January 2027 at the latest (see figure).
•
If a specification concerning the maximum number of cycles and a
specification concerning the service life (i.e. a date) are provided, the
specification that occurs first shall apply.
Fig. 4: Different service life – engraving on the bucket/rotor
•
Refer to the table of the service life of rotors and accessories (see
chapter 11.4 - " Table of the service life of rotors and accessories ")!
Refrigerated Centrifuge Sigma 2-16KL
3 Safety
23 / 82
Advertisement
Table of Contents
