Ambient Conditions; Technical Documentation - Sigma 2-16KL Operating Manual

Refrigerated Centrifuge Sigma 2-16KL
10 Technical data
Pos : 210 /100 Sigma/100 BA Z entrifugen Sigma (Standardm odul e)/100 T ec hnisc he D aten/100- 0010 Umgebungsbedi ngungen gekühlt @ 28\mod_1405320679042_68.doc x @ 195027 @ 2 @ 1 →
10.1

Ambient conditions

NOTE
Pos : 211 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
→ Pos : 212 /100 Sigma/100 BA Z entrifugen Sigma (Standardm odul e)/100 T ec hnisc he D aten/100- 0020 Technisc he Dok um entation @ 28\m od_1405320681369_68.docx @ 195055 @ 2 @ 1
10.2

Technical documentation

Pos : 213 /010 Univ ers almodul e/ Abs chnittswec hs el @ 0 \mod_1202124514062_0.docx @ 418 @ @ 1
Pos : 214 /010 Univ ers almodul e/ Seitenwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
64 / 82
•
The figures are valid for an ambient temperature of +23°C and a
nominal voltage  10 %. The minimum temperature is ≤ +4°C and
depends on the rotor type, speed, and ambient temperature.
At a nominal voltage of 100V or 200V, a tolerance of +10% / -5% applies.
•
For indoor use only.
•
Allowable ambient temperature +5°C to +35°C.
•
Max. allowable relative humidity of air 80% from 5°C up to 31°C with a
linear decrease to 67% relative humidity of air at 35°C.
•
Maximum altitude 2,000 m above sea level.
For environmental reasons, the comprehensive technical documentation of
the centrifuge (e.g. circuit diagrams) and the safety data sheets of the
manufacturers of refrigerants and lubricants are not attached to this
documentation.
You can order these documents from our service department.
Translation of the original operating manual, part no. 0700702
Version 08/2012, Rev. 1.24 of 28/04/2022 • sb