MacDon M1170 Unloading And Assembly Instructions page 97

11. If a rotary disc header is being replaced by an auger
header: Remove hose (A) from storage location (B).
Connect hose (A) to knife pressure receptacle (C) on
the frame.
NOTE:
Hose quick-disconnect (C) is only present on M1170
Windrowers with the R1 Series Hydraulic Drive kit
(MD #B6845) installed.
12. Remove the cover from receptacle (A). Connect the
header's electrical harness to the receptacle.
215981
ATTACHING HEADERS TO WINDROWER
89
A
B
C
A
Figure 5.21: Knife Pressure Hose Positions
1 - Hose in Storage Position (Rotary Configuration)
2 - Hose to Knife Pressure Receptacle (Auger/Draper Configuration)
A
Figure 5.22: Electrical Connectors
1
2
Revision A