MacDon M1170 Unloading And Assembly Instructions page 63

2. Ensure that cab-forward or engine-forward directional
lock (A) at the base of the steering column is engaged.
3. Move GSL (A) into PARK (C).
4. Turn the steering wheel until it locks.
IMPORTANT:
Do NOT attempt to force the wheel out of the locked
position or damage to the steering system may occur.
NOTE:
It may be possible to move the steering wheel slightly when
it is in the locked position.
5. Fasten the seat belt.
6. Push HEADER ENGAGE switch (B) to ensure it is in the OFF
position.
215981
PREDELIVERY CHECKS
A
Figure 4.23: Direction Locks
A
Figure 4.24: Operator Controls
55
A
C
B
Revision A