Predelivery Checklist - MacDon M1170 Unloading And Assembly Instructions

Predelivery Checklist

Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number:
M1170 Windrower Predelivery Checklist
ü ü Item
Check for shipping damage or missing parts. Ensure that all
shipping material has been removed.
Check for loose hardware. Tighten any loose hardware to the
specified torque value.
Check the pressure level of the drive and caster tires. Ensure
that the pressures matches the specified values.
Check the lubricant level in the wheel drive hubs.
Check the level of the engine coolant.
Check the engine air intake.
Check the level of engine oil. Ensure that there are no engine
oil leaks.
Check the level of hydraulic oil. Ensure that there are no
hydraulic fluid leaks.
Check the fuel separator for water and foreign material.
Drain and clean the fuel separator as needed.
Check level of lubricant in the gearbox.
Ensure that the air conditioning compressor belt is properly
tensioned.
Ensure that the operator presence system is working
properly.
Ensure that the horn is working properly.
Start the engine. Allow the engine to reach operating
temperature. Perform the Operational Checks listed below.
Ensure that the fuel and diesel exhaust fluid (DEF) gauges on
the Harvest Performance Tracker (HPT) work properly.
Ensure that the engine speed is displayed correctly on
the HPT.
Ensure that selective catalytic reduction (SCR) conditioning
inhibit is turned off.
Ensure that the air conditioning and heater are functioning
properly.
215981
Engine Serial Number:
Reference
6.5 Torque Specifications, page 138
4.1.11 Checking Tire Pressure, page 51
4.1.13 Checking and Adding Wheel Drive Lubricant –
10 Bolt Wheels, page 58
Adding Wheel Drive Lubricant – 12 Bolt (Optional),
page 59
4.1.7 Checking And Adding Engine Coolant, page 48
4.1.3 Checking Engine Air Intake, page 45
4.1.4 Checking and Adding Engine Oil, page 46
4.1.5 Checking and Adding Hydraulic Oil, page 47
4.1.6 Checking Fuel Separator, page 48
4.1.8 Checking Engine Gearbox Lubricant Level and
Adding Lubricant, page 49
4.1.9 Checking Air Conditioning Compressor Belts,
page 50
4.2.1 Checking Operating Safety System, page 60
4.2.10 Checking Horn, page 74
4.1.12 Starting Engine, page 54
4.2.3 Checking Harvest Performance Tracker Display
Gauges, page 63
4.2.7 Checking Engine Speed, page 68
4.2.8 Checking Selective Catalytic Regeneration
Conditioning Mode, page 69
4.2.12 Checking Climate Controls, page 75
149
—
or 4.1.14 Checking and
Revision A