MacDon M1170 Unloading And Assembly Instructions page 3

Introduction
This manual contains unloading, assembly, and predelivery information for the MacDon M1170 Windrower. When paired
with one of MacDon's A40DX, R1 SP Series, R2 SP Series, D1X Series, or D1XL Series Headers, this windrower ably cuts and
lays a variety of grain, hay, and specialty crops in windrows.
®
The M1170 Windrower features Dual Direction capability, meaning that it can be driven in cab-forward or
engine-forward mode.
The designations right and left are determined by which direction the Operator is facing. The Operator is considered to be
looking cab-forward when they are facing the drive wheels, and engine-forward when facing the engine. This manual uses
the terms right cab-forward, left cab-forward, right engine-forward, and left engine-forward to refer to specific locations on
the machine.
The windrower's ignition keys should have been bundled with the shipping documents. They are used to start the engine
and to lock the cab doors and tool box compartment.
NOTE:
Keep your MacDon publications up-to-date. The most current version can be downloaded from our website
(www.macdon.com) or from our Dealer-only site (https://portal.macdon.com) (login required).
If the shipment is damaged or is missing parts, contact shortageanddamage@macdon.com.
This document is currently available in English only.
i
215981 Revision A