MacDon M1170 Unloading And Assembly Instructions page 81

10. Rotate the operator's seat to the engine-forward position.
11. Press ROAD LIGHT switch (A). Ensure that front road
lights (B) and rear red tail/brake lights (C) are functional.
12. Press HIGH/LOW switch (D). Ensure that lights (B) are
functional.
13. Press TURN SIGNAL switches (E) on the console. Ensure that
amber lights (F) are functional.
14. Press HAZARD LIGHT switch (G). Ensure that flashing hazard
lights (F) are functional.
15. Press the switches again to shut off the lights.
215981
PREDELIVERY CHECKS
Figure 4.51: Road Lights – Engine-Forward
73
E
G
D
A
F
B
F
C
Revision A