1. Open the cab door, turn the IGNITION switch to the ON
position, and confirm that the HPT display boots up and
shows the MacDon logo.
2. Start the engine. For instructions, refer to
Engine, page
54.
3. If a header is attached to the windrower, confirm that the
HPT initially displays the header-disengaged screen.
4. If a header is not attached to the windrower, confirm that
the HPT displays the no-header screen.
215981
PREDELIVERY CHECKS
Figure 4.31: HPT Display – Boot-Up
4.1.12 Starting
Figure 4.32: HPT Display – Header Disengaged
Figure 4.33: HPT Display – No Header
62
Revision A