Setting Language And Units Of Measurement - MacDon M1170 Unloading And Assembly Instructions

3. If a header is attached to the windrower, confirm that
header screen (A) appears on the HPT display.
4. Ensure that red park symbol (B) is lit.
5. Ensure that engine rpm (C) appears on the HPT display.
6. Ensure that fuel gauge (D), DEF gauge (E), and temperature
gauge (F) appear on the HPT display.

4.2.4 Setting Language and Units of Measurement

The language and unit of measurement options can be set in the Harvest Performance Tracker's (HPT) SETTINGS menu.
1. Navigate to the SETTINGS menu by pressing soft key 5 and
the Harvest Performance Tracker (HPT) scroll knob. For
instructions, refer to 6.1 Navigating Harvest Performance
Tracker, page 133.
2. Scroll to SCREEN icon (A) and select it.
3. Scroll to LANGUAGE AND UNITS icon (B), and select it to
open the adjustment window.
215981
PREDELIVERY CHECKS
Figure 4.36: HPT Display – Header Attached
Figure 4.37: Language and Units
64
B
A
C
D
F
E
A
B
Revision A