Removing A Fan Tray (0-2); Figure 3-1 Fan Tray 0-2 Locations - Sun Microsystems Netra 440 Service Manual

Removing a Fan Tray (0-2)

1. Attach the antistatic wrist strap.
See "Avoiding Electrostatic Discharge" on page
2. Open the system door.
3. Identify the fan tray to be removed and note the bay in which it is installed.
shows the location of the three fan trays. Refer to the Netra 440 Server
FIGURE 3-1
Diagnostics and Troubleshooting Guide (817-3886-xx) for more information about
isolating failed parts.
SCC
Fan Tray 0-2 Locations
FIGURE 3-1
Fan tray 1
Fan tray 0
Chapter 3 Removing and Replacing Hot-Swappable Components
32.
Fan tray 2
37