Table of Contents
Advertisement
46
Configuring DigiMotion
Chapter 4: Configuring Your DigiSuite Cards and VTR Settings
You can configure DigiMotion by selecting the default audio input and
output pairs you want to use with DigiTools and third-party programs.
You can also adjust the gain of your analog audio input pairs, and select
the type of A/V drive you're using with DigiMotion.
Note
DigiTools uses only audio Input and Output Pair 1.
Configuring the audio input pairs
To configure your audio input pairs, click the
tab.
Input
Important
Both audio input pairs must be either analog or digital.
q
or
Analog Input
type of audio input you're using. If you select
remaining controls in this dialog box will be unavailable.
q
Input Pair 1
Use this list to select your default analog audio Input
Pair 1. For example, to use the source connected to your balanced
analog IN 1 and IN 2 inputs, select
q
Input Pair 1 Gain
your analog audio Input Pair 1. To obtain a precise setting, click the
arrows instead of dragging the slider. To return to the factory default
setting, click the
Select the option that matches the
Digital Input
XLR (balanced analog)
Use these controls to adjust the default gain of
button.
Def
tab, then the
DigiMotion
Digital Input
, the
.
Advertisement
Table of Contents
