About this manual
Important, last-minute information
Any important information that wasn't available for inclusion in the
manual at print time is provided to you in one or more of the following
ways:
q
The readme.1st file in the DigiUtils/Docs directory on the DigiSuite
CD-ROM.
q
Other essential information provided in a readme file installed with
the software in the Matrox DigiSuite Utilities folder.
q
Printed Release Notes packaged with the manuals (if required).
PDF documents on CD-ROM
The DigiSuite manuals are also available as Portable Document Format
(PDF) files in the DigiUtils/Docs directory on the DigiSuite CD-ROM.
You can view these documents using Adobe Acrobat Reader version 3.0
or later. To install the Acrobat Reader, run Windows NT Explorer or File
Manager, go to the AcrobatReader directory on the DigiSuite CD-ROM,
then double-click the ar32e30.exe file.
This manual contains instructions for DigiSuite hardware and software
installation and configuration.
q
Chapter 1, "Introducing DigiSuite,"
DigiSuite and explains the contents of this manual.
q
Chapter 2, "Installing the DigiSuite Hardware,"
instructions for installing the DigiSuite cards and related
Movie-2 bus connector.
q
Chapter 3, "Installing the DigiSuite Software,"
the drivers required to use your cards, and optional software that's
provided with DigiSuite.
q
Chapter 4, "Configuring Your DigiSuite Cards and VTR Settings,"
explains how to configure your DigiSuite cards to meet specific input
and output requirements, as well as configure your VTR for device
control with DigiTools.
q
Appendix A, "Special Installation Instructions,"
multiple DigiSuite card sets or change your hardware installation by
adding or removing cards.
presents an overview of Matrox
provides you with
explains how to install
explains how to install
About this manual
5
Need help?
Do you have a question about the DigiSuite and is the answer not in the manual?
Questions and answers