Table of Contents
Advertisement
Adding two fans
q
Since the area of highest heat buildup is near the middle of the card
set, you can try to install an additional fan directly over the expansion
slots, but in such a way that it will draw air out from between the
cards. The resulting air current flow will pull heated air out from
between the circuit boards, thus dissipating more heat. This is only
possible if your system has enough room for the mounted fan.
Card guides
Airflow
Important
Improper installation procedures can result damage to your DigiSuite
components and/or your computer system. Matrox Electronic Systems
Ltd. is not responsible for any damage caused by faulty installation.
Fan installation should be done by a qualified technician.
DigiLinx
Unusable ISA slot
DigiMix
DigiMotion
PCI slots
Video display
card
Recommendations
59
Advertisement
Table of Contents
