Table of Contents
Advertisement
–
Setup
Adjusts the level of black in the picture.
q
Use Automatic Gain Control (AGC)
the gain of your analog input signal to automatically be adjusted to
compensate for very bright or dark images. This improves the
brightness or contrast of your picture.
q
Source has Built-in TBC
signal is stable and broadcast-quality. This allows DigiMix to use
the input signal as-is, and will therefore be able to reproduce the
signal precisely without degradation.
If your source device doesn't have a time base corrector or meet
broadcast-quality standards, make sure this option isn't selected.
DigiMix will then filter the signal to increase the tolerance for sync
pulse instability.
q
Allow Super Black Input
luminance level of your analog input signal to fall below the standard
black level.
q
Allow Super White Input
luminance level of your analog input signal to exceed the standard
maximum white level.
q
Apply Edge Sharpening to Video
sharpen the edges in your picture (for analog input only). The edge
sharpening is done by amplifying the high frequency component of
the video input's luminance signal. Be aware that selecting this
option may reduce the clarity of fine details in your image.
Select this option if you want
Select this option if your analog input
Select this option to allow the lowest
Select this option to allow the highest
Select this option to slightly
39
Configuring DigiMix
Advertisement
Table of Contents
