Table of Contents
Advertisement
q
Input Pair 2
Use this list to select your default analog audio Input
Pair 2. For example, to use the source connected to your unbalanced
analog IN 3 and IN 4 inputs, select
q
Input Pair 2 Gain
your analog audio Input Pair 2. The controls work the same as
explained for
Input Pair 1 Gain
Configuring the audio output pairs
To configure your audio output pairs, click the
tab.
Output
Important
Both audio output pairs must be either analog or digital.
q
or
Analog Output
the type of audio output you're using.
q
and
Output Pair 1
audio output pairs. Different selections are available, depending on
whether you're using analog or digital output.
For example, to use the recorder connected to your balanced analog
OUT 1 and OUT 2 outputs, set
. To use the recorder connected to your first balanced digital
analog)
stereo output, set
.
stereo)
RCA (unbalanced analog)
Use these controls to adjust the default gain of
.
Select the option that matches
Digital Output
Use these lists to select your default
Output Pair 2
Output Pair 1
Output Pair 1
to
AES/EBU (balanced digital
DigiMotion
tab, then the
to
XLR (balanced
Configuring DigiMotion
47
.
Advertisement
Table of Contents
