40
Chapter 4: Configuring Your DigiSuite Cards and VTR Settings
Configuring the video and key output signals
To configure the output signals from DigiMix, click the
the
Output
tab.
To ensure you make accurate adjustments, you must connect your system
to a vectorscope and select an appropriate test pattern.
q
Display Source
on your NTSC or PAL monitor each time you start your system. For
example, to display your default video source as selected in the
dialog box, select
DigiMix Input
DigiMix graphic frame buffer without the internal key signal, select
Graphic (external key)
q
To check the effect of making adjustments in this
Test Pattern
dialog box, select a test pattern from this list. Your selected pattern
will be displayed on your NTSC or PAL monitor only while this
dialog box is open.
Important
To display any of the graphic test patterns, such as the
Graphic for Edge Filtering Adjustment
display source from the
q
Apply Edge Filtering to Graphics
eliminate distorted or "ringing" (multiple) edges in your graphics.
These can result from abrupt changes in brightness at the edges of
objects. For most graphics, edge filtering gives you the best results.
Use this list to select the source you want to display
Video
.
Display Source
Select this option to help
DigiMix
. To display the graphic in the
, you must select a graphic
list.
tab, then