Table of Contents
Advertisement
q
Key H-Pos
Use this control to advance or delay the key output signal
with respect to the video output signal. You may need to do this to
align your key images with their underlying images when routing the
key output to a downstream switcher.
To check the external key alignment, set the display source to
Graphic (external key)
from the
Adjustment
q
Use this control to align the video output's color
SC/H Phase
subcarrier phase with its horizontal sync pulse. This simultaneously
affects all hues in the picture.
Because of the method used to perform the SC/H Phase adjustment,
not all values between –180 and 180 degrees are supported. If
needed, the value you enter will be clipped to the nearest supported
value.
q
Video H-Pos
Use this control to advance or delay the video output
with respect to the video input time frame reference. This lets you
compensate for delayed input signals.
Important
Because the
interdependent, you'll probably need to adjust both controls if you make
a change to either one.
, then select
Graphic for Key H-Pos
list.
Test Pattern
SC/H Phase
and
Video H-Pos
41
controls are
Configuring DigiMix
Advertisement
Table of Contents
