Remove The Server - HPE Apollo DX2000 User Manual

Remove the server

CAUTION: To prevent improper cooling and thermal damage, do not operate the chassis unless all bays are
populated with a component or a blank.
CAUTION: To avoid damage to the server or server blank:
• Always support the bottom of the server or server blank when removing it from the chassis.
• Do not use the release lever to carry the server or server blank.
Procedure
1. Power down the server.
2. Disconnect all peripheral cables from the server.
3. Loosen the release lever thumbscrew.
4. Open the release lever.
5. Use the release lever to pull the server out of the chassis.
• 1U server
35
Operations