Table of Contents
Advertisement
12. Place the chassis on a sturdy, level surface.
Remove the access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause electrostatic
discharge.
Procedure
1.
Power down the servers.
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the chassis.
3.
Disconnect all peripheral cables from the servers and chassis.
4.
If installed, remove the front bezel.
5.
Label the drives before removing them. The drives must be returned to their original location.
6.
Remove the hot-plug drives.
7.
If installed, remove the RCM module.
8.
Remove the power supplies.
9.
If installed, remove the server blanks.
10. Remove the servers.
38
Operations
Advertisement
Table of Contents
